Fixing a leaking roof should ideally be done by professional roofers in Killeen, Texas. However, if you want to give DIY roofing a try, there are specific steps you should take to be as safe and effective as possible.
First and foremost, you should only attempt your own roof repair in Killeen, TX, if you are confident in your abilities. If you do have extensive DIY experience, however, it never hurts to brush up on your safety considerations.
The first step for Killeen roof repair by finding the leak. It might be identifiable by the presence of mold or mildew. Roofers in Killeen, Texas, recommend starting at the lowest point of the leak and working your way upwards to the source.
Check your roof vents to assess their condition if you’ve identified the source. It’s possible that the vent is dislodged, or the surrounding area has cracked or is otherwise damaged.
If this is the source of the leak in your Killeen roofing, you need to remove the vent and peel back the surrounding shingles. Roofing companies in Killeen, TX, recommend using a pry bar for this step.
Once removed, you can replace the vent by applying a thick coat of exterior sealant or roofing cement underneath the vent’s flashing. Roll back the shingles, then nail down your vent at each corner. To ensure the seal is complete, also nail the vent down every 4 inches and cover each nail with the sealant.
If the vents are in good shape, the leak could be caused by damage to the actual roof deck. To access this area for repair, you need to remove the shingles from the site using a pry bar. Roofing companies in Killeen, TX, recommend starting this process two rows of shingles above the area you need to repair, working downwards as you progress.
Next, you need to remove the damaged underlayment. Roofers in Killeen, TX, typically cut underlayment with a knife and pull out nails with pliers or a pry bar. Then you can cut away the old deck with a circular saw.
Measure the damaged area and cut your new plywood deck and underlayment sheet accordingly. This should be cut on the ground and then applied to your Killeen roofing.
After you repair your roof deck, it’s to add in new shingles. Start at the bottom row, leafing your new shingles into the existing ones. As you progress, apply a layer of roofing cement along the bottom of each shingle, overlapping each layer slightly. Once you reach the top row, you can combine your shingles by sliding your new ones under the existing top row.
The best way to ensure comprehensive roof repair in Killeen, TX, is to contact professionals. This is often cheaper and means you’ll get a great job every time with no risk of injury to yourself. Only attempt DIY if you’re 100% confident that you’ve done your research and have the right practical skills.